DWD 107.03
DWD 107.03 Effect. If a piece cutter or skidding operator has been found, under
ss. DWD 107.04 and
107.05, to be free from the direction and control of a logging contractor or forest products manufacturer and to be engaged in an independently established business, the piece cutter or skidding operator is an independent contractor and not an employee of the logging contractor or forest products manufacturer under s.
108.02 (12) (c), Stats.
DWD 107.03 History
History: Cr.
Register, November, 1991, No. 431, eff. 12-1-91;
CR 07-009: am. Register June 2007 No. 618, eff. 7-1-07.
DWD 107.04(1)
(1) The department shall examine the factors enumerated in this section to determine, both under contract and in fact, whether a piece cutter or skidding operator is free from a logging contractor's or forest products manufacturer's direction or control while the piece cutter or skidding operator performs services for the logging contractor or forest products manufacturer. The department shall determine whether:
DWD 107.04(1)(a)
(a) The piece cutter or skidding operator is responsible for providing and maintaining all of the equipment, supplies and tools necessary to meet the contract obligations;
DWD 107.04(1)(b)
(b) The piece cutter or skidding operator supplies or is responsible for supplying the necessary personal services to meet the contract obligations and may engage the services of individuals, including other piece cutters and skidding operators, without the knowledge or consent of the logging contractor or forest products manufacturer;
DWD 107.04(1)(c)
(c) The piece cutter or skidding operator may refuse to contract for work, may refuse to perform work not covered by the contract when requested by the logging contractor or forest products manufacturer or may refuse to extend a contract for services;
DWD 107.04(1)(d)
(d) The logging contractor or forest products manufacturer may not supervise, either directly or indirectly, the piece cutter or skidding operator in the performance of services; and
DWD 107.04(1)(e)
(e) The logging contractor or forest products manufacturer may not discipline or reprimand the piece cutter or skidding operator or impose work rules to be obeyed by the piece cutter or skidding operator.
DWD 107.04(2)
(2) If the department determines that all of the factors under
sub. (1) (a) to
(e) are present in the relationship between the piece cutter or skidding operator and the logging contractor or forest products manufacturer, the piece cutter or skidding operator shall be deemed to be free from the direction and control of the logging contractor or forest products manufacturer in the performance of services under s.
108.02 (12) (c) 1., Stats. If one or more of the factors under
sub. (1) (a) to
(e) are not present, the department shall consider additional factors of the relationship, both under contract and in fact, including whether:
DWD 107.04(2)(a)
(a) The piece cutter or skidding operator sets the hours of the day and the days of the week the contract services are to be performed;
DWD 107.04(2)(b)
(b) The piece cutter or skidding operator does not require training by the logging contractor or forest products manufacturer in order to perform the contract services;
DWD 107.04(2)(c)
(c) The logging contractor or forest products manufacturer may not discharge the piece cutter or skidding operator except for breach of contract; and
DWD 107.04(2)(d)
(d) The rate of compensation for services is set by the piece cutter or skidding operator, or is determined through bona fide negotiations with the logging contractor or forest products manufacturer, or the piece cutter and skidding operator are free to reject the rate of compensation offered by the logging contractor or forest products manufacturer.
DWD 107.04(3)
(3) If the department determines that all of the factors under
sub. (2) (a) to
(d) are present in the relationship between the piece cutter or skidding operator and the logging contractor or forest products manufacturer, the piece cutter or skidding operator shall be deemed to be free from the direction and control of the logging contractor or forest products manufacturer in the performance of services under s.
108.02 (12) (c) 1., Stats. If one or more of the factors under
sub. (2) (a) to
(d) are not present, the piece cutter or skidding operator may be deemed to be free from the direction and control of the logging contractor or forest products manufacturer under s.
108.02 (12) (c) 1., Stats.
DWD 107.04(4)
(4) If the piece cutter or skidding operator is found to be under the direction or control of the logging contractor or forest products manufacturer under
subs. (1) and
(2), the piece cutter or skidding operator shall be deemed to be an employee of the logging contractor or forest products manufacturer under s.
108.02 (12) (c) 1., Stats.
DWD 107.04 History
History: Cr.
Register, November, 1991, No. 431, eff. 12-1-91;
CR 07-009: am. (2) (intro.), (3) and (4) Register June 2007 No. 618, eff. 7-1-07.
DWD 107.05
DWD 107.05 Independently established business; customarily engaged. DWD 107.05(1)
(1) If the department determines that a piece cutter or skidding operator is free from a logging contractor's or forest products manufacturer's direction or control in the performance of services under
s. DWD 107.04, the department shall examine the following factors to determine whether a piece cutter or skidding operator who performs services for a logging contractor or forest products manufacturer is performing these services in an independently established business in which the piece cutter or skidding operator is customarily engaged. The department shall determine whether:
DWD 107.05(1)(a)
(a) The piece cutter or skidding operator negotiated a contract with the logging contractor or forest products manufacturer for the right to cut timber or the right to skid logs;
DWD 107.05(1)(b)
(b) The piece cutter or skidding operator negotiated the compensation to be paid for cutting timber or skidding logs;
DWD 107.05(1)(c)
(c) The piece cutter or skidding operator has an ownership interest in a business. In determining whether the piece cutter or skidding operator has an ownership interest in a business, the department shall consider whether the piece cutter or skidding operator:
DWD 107.05(1)(c)1.
1. May sell or give away the business without restriction from the logging contractor or forest products manufacturer;
DWD 107.05(1)(c)2.
2. Has an expectation of profit or bears the risk of loss while performing services for the logging contractor or forest products manufacturer; and
DWD 107.05(1)(c)3.
3. Has a monetary investment in the trade, such as tools, equipment and inventory, which are usual and customary in the industry.
DWD 107.05(1)(d)
(d) The piece cutter or skidding operator is represented to logging contractors and forest products manufacturers as a person who provides timber cutting or log skidding services;
DWD 107.05(1)(e)
(e) The piece cutter or skidding operator is free to solicit contracts, enter into contracts and perform services under contract for more than one logging contractor or forest products manufacturer at or about the same time; and
DWD 107.05(1)(f)
(f) The piece cutter or skidding operator determines the rate of pay, is liable for paying the wages, and actually pays the wages of individuals, including other piece cutters and skidding operators, engaged by the piece cutter or skidding operator to meet the contract obligations.
DWD 107.05(2)
(2) If the department determines that all of the factors under
sub. (1) (a) to
(f) are present in the relationship between the piece cutter or skidding operator and the logging contractor or forest products manufacturer, the piece cutter or skidding operator shall be deemed to be performing services in an independently established business in which the piece cutter or skidding operator is customarily engaged under s.
108.02 (12) (c) 2., Stats. If one or more of the factors under
sub. (1) (a) to
(f) are not present in the relationship between the piece cutter or skidding operator and logging contractor or forest products manufacturer, the department shall consider additional factors including whether:
DWD 107.05(2)(a)
(a) The business of the piece cutter or skidding operator could continue when the contractual relationship with the logging contractor or forest products manufacturer ends;
DWD 107.05(2)(b)
(b) The piece cutter or skidding operator is free to perform services for other logging contractors or forest products manufacturers while performing services for the logging contractor or forest products manufacturer;
DWD 107.05(2)(c)
(c) The piece cutter or skidding operator bears the principal burden of maintaining personal expenses such as meals, lodging and transportation, while performing services;
DWD 107.05(2)(d)
(d) The piece cutter or skidding operator has a reputation in the community generally on which to rely for business as a piece cutter or skidding operator; and
DWD 107.05(2)(e)
(e) The piece cutter or skidding operator may incur liability for damages if there is a breach of contract by the piece cutter or skidding operator.
DWD 107.05(3)
(3) If the department determines that all of the factors under
sub. (2) (a) to
(e) are present in the relationship between the piece cutter or skidding operator and the logging contractor or forest products manufacturer, the piece cutter or skidding operator shall be deemed to be performing services in an independently established business in which the piece cutter or skidding operator is customarily engaged under s.
108.02 (12) (c) 2., Stats. If one or more of the factors under
sub. (2) (a) to
(e) are not present, the piece cutter or skidding operator may be deemed to be performing services in an independently established business in which the piece cutter or skidding operator is customarily engaged under s.
108.02 (12) (c) 2., Stats.
DWD 107.05 History
History: Cr.
Register, November, 1991, No. 431, eff. 12-1-91;
CR 07-009: am. (2) (intro.) and (3) Register June 2007 No. 618, eff. 7-1-07.
